9 November 2026
Aspect vs slope: which terrain metric actually moves your shear estimate

Every siting engineer has had the argument in a truck cab on the way up to a candidate ridge: do we weight the slope angle or the aspect first when we're guessing at shear before the mast goes in? They do different jobs, and conflating them is how a desk estimate ends up wrong by the time the met data comes back.
Slope tells you about the flow, aspect tells you about the exposure
Slope is steepness, plain and simple. It's the number that drives the speed-up ratio on a windward face and the risk of flow separation on the lee side. A 20% grade facing into the prevailing sector accelerates the boundary layer and can flatten the shear profile near hub height, sometimes enough that a standard power-law exponent stops describing what's happening at the rotor. The same grade on the back side of that ridge is a different problem: separated flow, recirculation, elevated turbulence intensity, and a shear profile that can reverse sign depending on stability.
Aspect is compass direction. It's the one people under-weight because it feels like a solar-panel metric, not a wind one. But aspect decides which flow regime hits the slope on any given day. A south-facing slope in a basin with strong diurnal heating gets upslope flow and convective mixing in the afternoon, then a drainage flow at night that can bring low-level jets and sharp low-level shear right into the rotor swept area. A north-facing slope in the same basin might sit in shadow long enough that it never breaks the nocturnal inversion, and your shear exponent stays stubbornly high well past sunrise.
Why the shear estimate needs both, not either alone
Run slope without aspect and you get a geometry problem: how steep, how far, how much speed-up. Run aspect without slope and you get an exposure problem: which sector, how often, how much solar loading. Neither answers the question on its own.
What actually moves a shear estimate is the interaction. Take two ridgelines with identical gradient. One faces into the dominant sector off your wind rose and gets clean, attached flow most of the year, so your shear profile tracks something close to the open-terrain exponent you'd expect from a roughness-length lookup. The other faces 90 degrees off that sector, sits in partial shelter from an upwind rise, and spends a good fraction of hours in separated or channeled flow, which drags the exponent around enough that a single annual average hides more than it shows.
This is the part that's easy to miss from a contour map alone, because contour lines give you slope at a glance but bury aspect in the spacing and orientation of the lines. You end up needing both the gradient and the facing direction cross-referenced against the sector frequency before you can say with any confidence which candidate positions are worth a twelve-month met campaign and which ones a desk screen should rule out before a crew ever drives up.
That's the screening step that pays for itself: working through obstacle height, surface roughness, and slope-by-aspect together on the stereo imagery for the whole ridge before committing a mast to one spot, which is the kind of pass you can run at windfarmsiting.com ahead of the field season. If you've got a ridgeline on the list this year, it's worth running that screen before the truck leaves the yard.